Analisis Umur Fatik Rangka Penyangga Aileron Flight Control Simulator Berkapasitas 101 kg Di PT MMF

Iwan Engkus Kurniawan(1*),

(1) Politeknik; Penerbangan Indonesia Curug
(*) Corresponding Author

Abstract


Penelitian ini mengkaji tentang umur fatik rangka penyangga aileron flight control simulator menggunakan metode elemen hingga. Desain dan perhitungan umur fatik rangka menggunakan perangkat lunak Solidworks 2020. Dalam penelitian ini menggunakan 3 variabel desain yaitu: Awal, Baru, dan Alternatif. Sedangkan material yang digunakan dalam penelitian ini menggunakan ASTM A500 dan ASTM A36. Hasil simulasi memperlihatkan rangka penyangga aileron desain Awal, Baru dan Alternatif dengan material ASTM A36 memiliki umur fatik minimum berturut-turut yaitu 1,41 x 105, 6,50 x 106, dan 1,00 x 107 siklus. Sedangkan pada desain Awal, Baru dan Alternatif dengan material ASTM A500 memiliki umur fatik minimum berturut-turut 1,04 x 104, 3,71 x 104, dan 1,00 x 107 siklus.

Keywords


Engineering; Aircraft; Science; Material

Full Text:

PDF

References


R. K. N. Suprapto and L. A. N. Wibawa, “Desain dan Analisis Tegangan Rangka Alat Simulasi Pergerakan Kendali Terbang Menggunakan Metode Elemen Hingga,” J. Tek. Mesin ITI, vol. 5, no. 1, p. 19, Mar. 2021, doi: 10.31543/jtm.v5i1.559.

M. Tomlin and J. Meyer, “Topology Optimization of an Additive Layer Manufactured (ALM) Aerospace Part,” 7th Altair CAE Technol. Conf. 2011, pp. 1–9, 2011.

M. P. Raj, “A Schematic Design And Analysis Of A Hinge In Aerospace Structures Using Different Materials,” vol. 3, no. 6, pp. 577–584, 2017.

R. C. Hibbeler, Mechanics Of Materials, 10th ed. Pearson, 2015.

E. Santecchia et al., “A Review on Fatigue Life Prediction Methods for Metals,” Adv. Mater. Sci. Eng., vol. 2016, 2016, doi: 10.1155/2016/9573524.

L. A. N. Wibawa, “The fatigue life prediction of gantry crane with load capacity variation using ansys workbench,” Tek. J. Sains dan Teknol., vol. 16, no. 1, p. 18, 2020, doi: 10.36055/tjst.v16i1.7490.

C. M. Sonsino, “Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety,” Int. J. Fatigue, vol. 29, no. 12, pp. 2246–2258, 2007, doi: 10.1016/j.ijfatigue.2006.11.015.

I. Malik, “Analisis fatik berbantuan komputer,” vol. XXXII, no. 1, pp. 7–13, 2011.

Nurhayati and T. R. Wijaya, “Kekuatan dan umur fatik struktur penompang jaw crusher dengan metode elemen hingga,” vol. 5, no. 1, pp. 1–5.

E. Pranoto, E. Purwanto, P. K. Transportasi, P. K. Transportasi, and J. Tengah, “Prosedur Perhitungan Umur Wheel Rim,” pp. 61–74, 2019.

SOLIDWORKS Help, “Mesh Quality Checks,” Dasssault Systemes, 2021. https://help.solidworks.com/2021/english/SolidWorks/cworks/c_Mesh_Quality_Checks.htm?verRedirect=1 (accessed Jul. 29, 2021).

P. M. Kurowski, Engineering Analysis with SOLIDWORKS Simulation 2018. United States of America: Stephen Schroff, 2018.

V. Dobrovolsky and K. Zablonsky, Machine elements : a textbook. Moscow: Peace Publisher.

R. H. Pritchard, P. Lava, D. Debruyne, and E. M. Terentjev, “Precise determination of the Poisson ratio in soft materials with 2D digital image correlation,” Eugene M. Teren., vol. 9, no. 26, pp. 1–14, 2013.

A. Amiruddin and F. A. Lubis, “Analisa Pengujian Lelah Material Tembaga Dengan Menggunakan Rotary Bending Fatigue Machine,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 1, no. 1, pp. 1–11, 2018, doi: 10.30596/rmme.v1i1.2430.

G. E. Dietre, Metalurgi Mekanik, 1st ed. Jakarta: Erlangga, 1992.

Z. Bi and W. D. Pikey, Peterson’s Stress Concentration Factors, Fourth. 2020.

E. Charkaluk and R. Seghir, “Shakedown , Dissipation And Fatigue Of Metals,” no. July, 2015, doi: 10.13140/RG.2.1.1238.0003.

J. Schijve, Fatigue of Structures and Materials. 1967.

Oentoeng, Konstruksi Baja. LPPM Universitas Kristen PETRA Surabaya, 2000.

A. Sucipta and A. Saggaff, “Analisa Pola Keruntuhan Konstruksi Rangka Atap Dengan Menggunakan Profil Baja Ringan,” vol. 1, no. 1, 2013.

F. Wahyu, S. Atmawan, E. Muthoriq, and H. M.K, “Analisis Kekuatan Suspensi Pegas Daun Truk Dengan Metode Finite Element,” Politeknologi Vol. 14 No. 3 Sept. 2015, vol. 14, no. 3, pp. 1–8, 2015.

N. Wahyudi and Y. A. Fahrudi, “Studi Eksperimen Rancang Bangun Rangka Jenis Ladder Frame pada Kendaraan Sport,” JEECAE (Journal Electr. Electron. Control. Automot. Eng., vol. 1, no. 1, pp. 71–75, 2017, doi: 10.32486/jeecae.v1i1.15.

H. U. Sajid and R. Kiran, “Influence of high stress triaxiality on mechanical strength of ASTM A36, ASTM A572 and ASTM A992 steels,” Constr. Build. Mater., vol. 176, pp. 129–134, 2018, doi: 10.1016/j.conbuildmat.2018.05.018.

A. P. Kumar, C. H. Siva, and R. Krishna, “Sensitivity analysis of tig welding parameters for astm- 500 grade b weldments,” vol. 6, no. 1, pp. 1–10, 2015.

Y. Gorash and D. Mackenzie, “On cyclic yield strength in definition of limits for characterisation of fatigue and creep behaviour,” Open Eng., vol. 7, no. 1, pp. 126–140, 2017, doi: 10.1515/eng-2017-0019.

M. A. De Rosa and F. C, “The influence of an intermediate support on the stability behavior of cantilever beams subjected to follower forces,” J. Sound Vib., vol. 137, no. 1, pp. 107–115, 1990.

S. O. Afolabi, B. I. Oladapo, C. O. Ijagbemi, A. O. M. Adeoye, and J. F. Kayode, “Design and finite element analysis of a fatigue life prediction for safe and economical machine shaft,” J. Mater. Res. Technol., vol. 8, no. 1, pp. 105–111, 2019, doi: 10.1016/j.jmrt.2017.10.007.




DOI: https://dx.doi.org/10.31543/jtm.v6i1.724

Article Metrics

Abstract view : 275 times
PDF - 288 times

Refbacks

  • There are currently no refbacks.


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 Generic License. This Journal Published by Study Program of Mechanical Engineering-Institut Teknologi Indonesia.